Description

The Pocket Console® is the smallest and most "user-friendly" DMX control board ever made.  Perfect for small productions, mobile installations, trade shows, flame machines, foggers, haunted houses... or anywhere else you may need DMX control of your gear.

Other DMX consoles may have "bells and whistles" you don't need. Why pay for features intended for large productions when you only need simple control? Why spend hours learning how to program a large console when you can use something that is "plug-and-play?"  Need Bump Buttons?  Most affordable boards on the market don't have them.  The Pocket Console does!

Features

• It is small, lightweight, portable and designed to be hand-held
• Levels are set using eight faders (slider pots)
• Each FADER has an associated bump button
• 512 dimmer addresses are patchable to any of the eight faders
• The faders are patchable using from 0 to 512 dimmer addresses per fader
• The unit is powered by a 9v battery OR by a 120v AC power supply (both included)

Made in the USA!

If you are looking for a basic and reliable device to test, setup or run a DMX system, this is the product you need.

Specifications

• Dimensions: 6-5/8" wide x 3-1/4" tall x 1-3/8" deep
• Fader handle clearance: 1-5/8"
• DMX cable length with 5-pin connector: 12" min.
• Weight with battery: 13oz
• 9 Volt Alkaline Battery Life: 3 hours minimum (FYI, my first battery lasted 2 years)
• 120v AC adapter (included)
• Number of DMX dimmer addresses supported: 512
• Number of Faders: 8 with bump buttons
• Data output: DMX-512 1990 standard
• Data Speed: 44hz
• Comes with instructions & 90 day warranty